Blade Switch; Service Meter; Park Brake; Seat Adjustment Lever - Husqvarna 96769610201 Operator's Manual

Table of Contents

Advertisement

Available languages

Available languages

CONTROLS

Blade Switch

To engage the mower deck, pull the knob out;
mower blades are disengaged when the knob is
pressed down.

Service Meter

The service meter displays the total number of
hours the engine has run and shows when the
engine and mower need servicing.
After every 50 hours of operation, an oil can icon
will appear and stay on for two hours, before
an automatic reset occurs. To manually reset
the meter, turn the key off and on five times at
one second intervals. To service the engine and
mower, see the Service Journal of this manual.
Note: The service meter operates (clocks hours)
only when the engine is running. Be sure to turn
the key off when the unit is not in use, to prevent
meter hours from accumulating.
14

Park Brake

The park brake is on the left side of the machine.
Pull the lever backward to operate the brake and
push forward to release it.
IMPORTANT INFORMATION The machine
must stand still when engaging the park
brake. Always
engage
dismounting. Release the park brake before
moving the mower.

Seat Adjustment Lever

The seat can be adjusted lengthways. The lever
under the front edge of the seat is moved to the
left (as seen by the driver in the seat), to adjust
the seat backward or forward.
IMPORTANT INFORMATION
be adjusted while unit is in motion.

Fuel Shut Off Valve

The fuel shut off valve is at the left rear of the
seat. The valve is off when the handle tab is
turned perpendicular to the fuel line.
the park brake before
Seat must not

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mz 54

Table of Contents