4. Pull the front bezel from the groove on the bottom of the computer and then remove the front bezel.
5. Perform the removal procedure in reverse to reinstall a new CRU.
Wire cover (for selected models)
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 66.
2. Remove the left side cover and right side cover. See "Left side cover and right side cover" on page 66.
3. Remove the front bezel. See "Front bezel" on page 67.
4. Remove the screws from the front of the computer case.
68
Lenovo Legion Tower 5 (26L, 5)Hardware Maintenance Manual