Wire Cover (For Selected Models) - Lenovo Legion T5 26AMR5 90RB User Manual

4. Pull the front bezel from the groove on the bottom of the computer and then remove the front bezel.
5. Perform the removal procedure in reverse to reinstall a new CRU.

Wire cover (for selected models)

Prerequisite
Before you start, read Appendix A "Important safety information" on page 41 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 22.
2. Remove the left side cover and right side cover. See "Left side cover and right side cover" on page 23.
3. Remove the front bezel. See "Front bezel" on page 24.
4. Remove the screws from the front of the computer case.
.
Chapter 5 CRU replacement
25