Table of Contents
Advertisement
Chapter 4 Turn On The Power!
Chapter 4 Turn On The Power!
1.
Turn on the power.
Ok, all cables have been properly connected.
computer by yourself? The final stage is to turn on the power to check what you have done so
far. Now take a short break and have a drink. Then turn on the computer to see how things are
going.
2.
Set BIOS (Basic Input/Output System).
Not long after activating the power, you'll expect to see the following screen and a line of
message saying " Press DEL to enter SETUP" at the bottom of the screen. Please press
Delete button:
Phoenix-AwardBIOS BIOS v6.00PG, An Energy Star Ally
Copyright (C) 2003, Phoenix Technologies, LTD.
L210 R0.05 July.16.2003 AOpen Inc.
Main Processor : AMD Ahtlon(tm) XP 3000+
Memory Testing : 491520K OK + 32M Shared Memory
DDR Dual Channel Enabled
Default / Setting
CPU
100MHz
DRAM
333MHz
AGP
66.67MHz / 66.67MHz
PCI
33.33MHz / 33.33MHz
Primary Master
Primary Slave
Secondary Master : None
Secondary Slave
Press DEL to enter SETUP, ESC to skip memory test
07/16/2003-nVidia-nForce-6A61BABAC-00
Default / Setting
/
166MHz
1.650V / 1.650V
/ 333MHz
AUTO
1.53V
3.30V
: ST30641A 3.01
: None
: AOpen CD-RW CRW1232PRO
28
Are you getting confident of assembling a
/ AUTO
/ 1.53V
/ 3.30V
1.2G
Advertisement
Table of Contents
