3.4 Cables and Connectors
1.
Before connecting necessary cables and connector to motherboard, you may found most of the
I/O panel connectors (IEEE1394, USB, Front Audio and S/PDIF) both at front panel and back
panel on motherboard have had been connected properly as shown.
2.
Connecting floppy cable, hard disk and DVD-RW cable on motherboard for later use.
Generally there are special screws for
hard disk in the parcel when you buy a
new hard disk. There will be no harm
done using those screws. If no screws
are attached, use those packed in the
accessory parcel. Make sure to use the
NO.2 screws. (See page 6)
I/O connectors have
had
been
previously.
Hard disk
cable
16
Don't mess up screws!!
inserted
DVD-RW
cable