Remove The Touchpad Board Cable; Make Sure The Following Frus (Crus) Have Been Removed; Remove The Lower Case; Remove The Battery Pack - Lenovo Slim Pro 7i Hardware Maintenance Manual

Figure 10. Remove the Wi-Fi card
Screw specifications
M1.6 x L1.7
Go to
https://support.lenovo.com/partslookup
part:
Wi-Fi card

Remove the touchpad board cable

Make sure the following FRUs (CRUs) have been removed.

"Remove the lower case" on page 26
"Remove the battery pack" on page 27
Step 1. Peel back the keyboard cable.
Figure 11. Remove the keyboard cable
Step 2. Remove the touchpad board cable from the touchpad board and the system board.
Number of screws
1
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
31