Save Settings And Quit ([S]Save & Quit); Quit Without Saving Settings ([Q]Quit Unchanged) - Sharp PG-F267X Setup Manual

Setting up the Projector Using RS-232C or Telnet
Save Settings and Quit
([S]Save & Quit)
Save set values and quit menu.
▼SETUP MENU
----------------------------SETUP MENU---------------------------
[1]IP Address [2]Subnet Mask
[4]User Name [5]Password
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup
[V]View All Setting [S]Save & Quit
setup>s
All Connection will be disconnect.
Continue(y/n)? y
Apply New setting...Done.
1 Enter "s" and press the "Enter" key.
2 Enter "y" and press the "Enter" key.
-24
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
1
2
Quit without Saving Set-
tings
([Q]Quit Unchanged)
Quit menu without saving setting values.
▼SETUP MENU
----------------------------SETUP MENU---------------------------
[1]IP Address [2]Subnet Mask
[4]User Name [5]Password
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup
[V]View All Setting [S]Save & Quit
setup>q
Quit Without Saving(y/n)? y
Setting Unchanged.
1 Enter "q" and press the "Enter" key.
2 Enter "y" and press the "Enter" key.
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
1
2