Power Control; Audio Only; Power Saving; No Signal Off - Sharp AQUOS LC-70LE632U Operation Manual

On-Screen Display Menu

Power Control

Power control setting allows you to save energy.
Example

Power Control

Audio Only

Power Saving

No Signal Off

No Operation Off

1
Press MENU to display the MENU screen, and then
press c / d to select "Power Control".
Press a / b to select a specifi c adjustment item,
2
and then press ENTER.
Press a / b (or c / d ) to select the desired setting,
3
and then press ENTER.
4
Press MENU to exit.
• Skip this step for "Audio Only".
Audio Only
When listening to music from a music program, you
can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Off: Both screen images and audio are output.
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE)
is pressed.
30
[ Standard]
[Enable]
[Disable]
Power Saving
This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video
content. When set to "Standard", "
screen.
Advanced: Optimizes power reduction based upon video
content and engages OPC. When set to "Advanced",
" " appears on the screen.
Off: This function does not work.
• "Power Saving" does not function when you set AV MODE
to "AUTO" or "DYNAMIC (Fixed)".
• You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
—If you set "OPC" to "On" when "Power Saving" is set to
"Standard", then the "Power Saving" setting will change
to "Advanced".
—When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be set
to "Off".
—"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
• When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears to the left of "OPC" in
the Picture Settings menu screen.
• You can select Power Saving by pressing POWER
SAVING on the remote control unit. (See page 22.)
• "Power Saving" is not available when the TV is in 3D mode.
No Signal Off
This function allows the TV to automatically shut the
power down when there is no signal received.
Enable: The power will automatically shut down if there is
no signal for 15 minutes.
Disable: This function does not work.
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
• When a TV program fi nishes, this function may not operate.
No Operation Off
This function allows the TV to automatically shut the
power down when there is no operation.
Enable: The power will automatically shut down if there is
no operation for 3 hours.
Disable: This function does not work.
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
" appears on the