Speaker; Removing The Speaker - Dell OptiPlex 5080 Service Manual

Steps
1. Remove the liner behind the VR heatsink module.
2. Align and adhere the VR heatsink on the system board.
3. Tighten the two captive screws that secure the VR heatsink to the system board.
Next steps
1. Install the fan duct.
2. Install the side cover.
3. Follow the procedure in

Speaker

Removing the speaker

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the fan duct.
About this task
The following images indicate the location of the speakers and provide a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the connector on the system board.
2. Unroute the speaker cable from the routing guides on the chassis.
3. Press the tab and slide the speaker along with the cable from the slot on the chassis.
50 Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.