Table of Contents
Advertisement
Available languages
Available languages
5
Maintenance and cleaning
Service life of the product extends and frequently
faced problems decrease if cleaned at regular
intervals.
B
This product must be unplugged during
maintenance and cleaning works (control
panel, body, etc.).
Lint Filter / Loading Door Inner
Surface
Lint and fibres released from the laundry to the
air during the drying cycle are collected in the Lint
Filter.
C
*Such fibre and lint are generally formed
during wearing and washing.
A
Always clean the lint filter and the inner
surfaces of the loading door after each drying
process.
C
You can clean the lint filter housing with a
vacuum cleaner.
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it up and open
the lint filter.
3. Clean lint, fibre, and cotton raveling by hand
or with a soft piece of cloth.
4. Close the lint filter and place it back into its
housing.
C
A layer can build up on the lint filter pores
that can cause clogging of the lint filter after
using the machine for a while. Wash the lint
filter with warm water to remove the layer
that builds up on the lint filter surface. Dry the
lint filter completely before reinstalling it.
C
Clean the entire inner surface of the loading
door and loading door gasket.
Cleaning the sensors
There are dampness sensors in the machine that
detect whether the laundry is dry or not.
47 EN
Advertisement
Table of Contents
