Switching The Mm 450 On/Off - Sennheiser MM 450 Instruction Manual

1
5
1
5

Switching the MM 450 on/off

CAUTION! Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects. Please protect your hearing.
Sennheiser headsets also sound exceptionally good at low
volumes.
Set the volume to a comfortable level.
Switching the MM 450 on
Press the Master button
flashes blue. You hear an ascending beep.
– When switching the headset on
go into pairing mode.
The headset is waiting to be paired with a Bluetooth enabled device
(see page 12).
– When the headset is already paired with an audio
Bluetooth connection is automatically established.
You hear an ascending beep and then your audio source.
– When the headset is already paired with an audio source
audio source is switched off
blue.
The headset will try for 3 minutes to connect to one of the up
to 8 previously paired audio sources. If this fails, the headset
automatically switches off after 60 minutes.
Switching the MM 450 off
Press the Master button
flashes 3 times red.
You hear a descending beep. The Bluetooth connection is automatically
deactivated. The headset switches off.
Putting the MM 450 into operation
and keep it pressed until the
for the first time, it will automatically
or out of range, the
and keep it pressed until the
LED
source, the
but the
LED flashes
LED
11