Table of Contents
Advertisement
Product Power State Table
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in
compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU)
No. 801/2013.
Required Power State Information
Power consumption in specified power mode, at
230V/50Hz input
Time after which equipment is automatically
switched into mode
Power consumption in networked standby if all wired
network ports are connected and all wireless network
ports are activated, at 230V/50Hz input
Network port deactivation/activation procedures.
Deactivating all networks will enable standby mode.
External Power Supply Technical Information
The external power supply provided with the product, in accordance with the Ecodesign Requirements for Energy
Related Products Directive 2009/125/EC, is in compliance with the following norms(s) or documents(s): Commission
Regulation (EU) 2019/1782.
Manufacturer
Commercial registration number
Address
Model identifier
Input voltage
Input AC frequency
Output voltage
Output current
Output power
Average active efficiency
Efficiency at low load (10%)
No-load power consumption
Please dispose of used batteries properly, following local regulations. Do not incinerate.
R E G U L AT O R Y A N D L E G A L I N F O R M AT I O N
Standby
≤ 0.5 W
< 2.5 hours
N/A
Bluetooth: Deactivate by clearing the pairing list by pressing and holding
the Bluetooth button for 10 seconds. Activate by pairing with a Bluetooth
source.
*product does not utilize a networked standby mode for a Bluetooth
connection and does not have the ability to be configured to a network via
Wi-Fi
or Ethernet
®
Bose Products B.V.
36037901
Gorslaan 60
1441 RG Purmerend
The Netherlands
DT20V-1.8C-DC
100V-240V
50Hz/60Hz
20V DC
1.8A
36W
89.0%
88.3%
0.08W
Power Modes
Networked Standby
N/A*
N/A*
N/A*
®
E N G L I S H - 5
Advertisement
Table of Contents
