Steps
1. Connect the fan cable to the connector on the system board.
2. Turn the fan assembly over.
3. Press the release tab on the fan assembly and place it on the system until it clicks into place.
Next steps
Next steps
1. Install the
2.5 in. hard-drive
2. Install the
front
bezel.
3. Install the
side
cover.
4. Follow the procedure in
Optical drive
Removing the optical drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
About this task
The following images indicate the location of the hard-drive bracket and provide a visual representation of the removal
procedure.
assembly.
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
23