Advertisement
Turning the Unit On/Off
* Once the connections have been completed (p. 3), turn on power
to your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or
damage to speakers and other devices.
1.
Turn on the power on the device you have connected to
the INPUT jack.
2.
Turn on the PM-03.
When turning off the unit, reverse the procedure given above.
* Before turning the unit on/off, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/off. However, this is normal
and does not indicate a malfunction.
Main Specifications
Roland PM-03: Personal Drum Monitor
Rated Power Output
Nominal Input Level
Speakers
Enclosure
Controls
Indicator
INPUT jacks
Power Consumption
Dimensions
Weight
Accessories
* 0 dBu = 0.775 Vrms
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
4
2.1ch total 30 W
(STEREO 7.5 W + 7.5 W, WOOFER 15 W)
INPUT jack (Stereo miniature phone type): 0 dBu
INPUT jack (1/4" phone type (L/MONO, R)): -10 dBu
7.5 cm (3") Full-range x2, 12 cm (5") Woofer
Bass-reflex type
ON switch, VOLUME knob, WOOFER knob
ON / STANDBY
Stereo miniature phone type
1/4" phone type (L/MONO, R)
25 W
243 (W) x 236 (D) x 452 (H) mm
9-5/8 (W) x 9-5/16 (D) x 17-13/16 (H) inches
6.0 kg / 13 lbs 4 oz
Owner's Manual, Power Cord
Placing the Unit
When connecting the PM-03 to the Roland V-Drums Lite, set things
up as illustrated below.
This way, you'll be able to enjoy the powerful 2.1 ch drum sounds
at the proper balance.
* Concerning placement and setup, make sure to also read the
section entitled "Placement, " under "Important Notes" (p. 2).
Advertisement
