Related Manuals for OneRemote MultyMedia TS1e
Summary of Contents for OneRemote MultyMedia TS1e
- Page 1 Beokompatible functions OneRemote Interface type 2631 Technisat MultyMedia TS1e Made in Denmark by www.oneremote.dk...
- Page 2 Daily use Other operations Menu alternativ SFI/ EPG Exit/ Back TV/ Radio Power manuel Stop Text Option info Exit *1 As the un-shifted function of the coloured function buttons has been assigned to other functions, they have to be preceded with a O to retrieve their actual coloured functions.
- Page 3 Congratulations With a OneRemote INT controller from www.oneremote.dk built in to your device, you can connect the device to any Bang & Olufsen TV and fully operate it your Bang & Olufsen remote control terminal. This guide explains how.
- Page 4 Scart cable, therefore no further cables is needed. With a OneRemote OneWay or TwoWay cable, the device can be placed up to 25 metres away from the TV. It could be placed in another room, under a sofa or where ever it suits, as operation is handled via the Scartcable.
- Page 5 The same goes with the other 3 coloured buttons. This way we have freed the direct function of the coloured buttons, to important operations. In a OneRemote environment the red button is used as Back, Backup or return. The green button is used as EPG, Guide or similar. Finally the blue and yellow button is used for programme stepping.
- Page 6 Option programming The OneRemote controller inside your device can be programmed with different options, to fit different setup and needs. An option programming is done by pressing a series of buttons in a special scheme that does not occur during daily use. A programming must be ended within 3 seconds.
- Page 7 Option 9x – programme zapping. The zapmode option makes it possible to exchange the functions of the up & down buttons with the blue & yellow buttons. The factory setting of programme zapping and up/ down arrows: Programme zapping. D and F Moving up/ down in on-screen menus.
- Page 8 2631u1uk...