Troubleshooting - Husqvarna 970 55 16-02 Operator's Manual

Hide thumbs

Table Of Contents

Table of Contents

Maintenance

Clean the external parts of the product with a dry cloth. Do not use water.

Examine that the start and stop button works correctly and is not damaged.

Make sure that the power trigger and the power trigger lockout function correctly

from a safety point of view.

Make sure that all controls work and are not damaged.

Keep the handles dry, clean and free from oil and grease.

Make sure that the screws and nuts are tight.

Make sure that the battery release buttons on the battery works and locks the

battery in the product.

Make sure that the battery is not damaged.

Make sure that the battery is charged.

Make sure that the battery charger is not damaged and operates correctly.

Examine all cables, couplings and connections. Make sure they are not dam-

aged and free from dirt.

Do a check of the connections between the battery and the product. Do a check

of the connection between the battery and the battery charger.

To clean the product, the battery and

the battery charger

1. Clean the product with a dry cloth after use.

2. Clean the battery and battery charger with a dry

cloth. Keep the battery guide tracks clean.

3. Make sure that the terminals on the battery and the

battery charger are clean before the battery is put in

the battery charger or the product.

Two piece-shaft

Apply grease to the end of the drive shaft after each 30

hours of operation. There is a risk that the drive shaft

ends (splined coupling) on models with two-piece shafts

will seize if they are not lubricated regularly.

User interface

LED display

Battery LED indicator flashes or-

ange