Panasonic GA-AS48TPoE+ Installation Manual page 17

 PoE power supply is impossible.
Power is not supplied to a Powered Device.
 If you use an STP cable, PoE power supply may not be possible depending on
the installation environment. In such cases, use a UTP cable.
 Is a CAT5e or better straight cable (RJ45-8/8) used?
 Is the cable connected to the port 1–48 that supports PoE power supply?
 Ensure that either the port alone or the entire equipment is not overloaded.
 Is the Powered Device connected to the port compliant with the IEEE802.3at
standard or IEEE802.3af standard?
Port LIM. LED is blinking green:
 Ensure that the total power supply demand from PoE-powered devices does
not exceed 336 W.
When the power supply is suddenly shut off:
 Confirm that a single port is not overloaded [Port LED (right) is not blinking
Green], or that the power supply capacity for the device overall is not being
exceeded (PoE LIM. LED is not blinking green).
* For the configuration and management methods, please see the
PDF version of the Operating Instructions on Panasonic's website.
17