Table of Contents
Advertisement
Sleep Timer Setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will turn
off.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP repeatedly
until "SLEEP 10" appears, and then press SLEEP
once again while "SLEEP 10" is displayed.
,
Note
You can check the remaining time before the
Unit turns off.
Press SLEEP The remaining time appears in the
display window.
Dimmer
Press SLEEP once. The display window will be darken
by half. To cancel it, press SLEEP repeatedly until dim
off.
Turn off the sound temporarily
Press
MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, appears the MUTE in the
display window.
Last Scene Memory
r
This unit memorizes last scene from the last disc that
is viewed. The last scene remains in memory even if
you remove the disc from the unit or switch off the
unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
Power Resume - Optional
r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save current
playback status.
System Select - Optional
You must select the appropriate system mode for
your TV system. Press and hold M PAUSE/STEP for
more than five seconds to be able to select a system
in the [Home Menu].
,
Note
If the USB device is connected or a disc is
inserted, this function is not operated.
Adjust the speaker level settings
You can adjust the sound level of each speaker.
1. Press SPEAKER LEVEL repeatedly to select a
desired speaker to set.
2. Press VOL -/+ to adjust the sound level of the
selected speaker while the level setting memu is
displayed on the display window.
3. Repeat and adjust the sound level of the other
speakers.
VOCAL FADER
You can enjoy the function as karaoke, by reducing
singer vocal of music in the various source. (MP3/
WMA/ CD/ etc.) Press the VOCAL FADER, and
"FADE ON" will appear in display window.
To cancel it, press VOCAL FADER again.
The quality of the VOCAL FADER may be different
depending on the recording conditions of music files.
,
Note
y This function is available to use only when a
microphone is connected.
y It is not available on the MONO source.
Auto power down
This unit will be off itself to save electronic consumption
in the case main unit is not connected to external device
and is not used for 25 minutes.
So does this unit after six hours since Main unit has
been connected to other device using analog input.
Operating
35
4
Advertisement
Table of Contents
