Table of Contents
Advertisement
Positioning the vehicle in the parking space
Parallel parking positioning overview.
Perpendicular parking positioning overview.
103
Park Assist Pilot
1.
Move the gear selector to the gear instruc-
ted by the system. Wait until the steering
wheel turns and then drive slowly forward.
2. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display.
3. Engage reverse gear and back up slowly.
4. Be prepared to apply the brakes when
instructed to do so by a graphic and mes-
sage in the center display.
The function will switch off automatically and
a graphic and message will appear to indicate
that parking has been completed. Adjust-
ments can always be made be the driver after-
ward. Only the driver can determine when the
vehicle is correctly parked.
CAUTION
The warning distance is shorter when the
sensors are used by Park Assist Pilot
(PAP
103
) compared to when they are used
by the Parking Assist system.
Related information
Park Assist Pilot* (p. 373)
•
Park Assist Pilot* limitations (p. 378)
•
DRIVER SUPPORT
Leaving a parallel parking space
with Park Assist Pilot*
The
Park Out
function can help the driver to
pull out of a parking space when the vehicle
is parallel-parked.
NOTE
Leaving a parking space with the
function should only be used in connection
with parallel parking – it does not work for
perpendicular parking.
The
Park Out
vated in the center display's
Function view or in Camera
view.
GREEN button indicator light – the func-
•
tion is activated.
GRAY button indicator light – the function
•
is deactivated.
1.
Tap
Park Out
in Function view or in Cam-
era view.
2. Move the gear selector to the suitable
position (e.g. D or R) for the direction in
which you will be pulling out of the park-
ing space.
* Option/accessory.
Park Out
function is acti-
}}
377
Advertisement
Table of Contents
