Vcr Connections - Philips MAGNAVOX Owner's Manual

VCR TV
TO
Connect your
B C Antenna or Cable signal to
ASIC ONNECTION
the IN FROM ANT(enna)
T he basic Antenna/Cable to
jack on the VCR.
VCR to TV connection is
shown here. If you have a Cable
Box, refer to the VCR owner's
manual for details.
300 to 75Ω
Adaptor
Outdoor
VHF/UHF
Antenna
Cable TV signal
C TV
ABLE
If you do not have a
C /C B
ABLE ABLE OX
Cable Box, then you're ready
to connect your Cable TV sig-
Y our Cable TV signal may be
nal to the TV.
a single (75Ω) cable or a
If you have a Cable Box:
Cable Box installation. In either
Connect the Cable TV signal
case, the connection to the TV
to the IN jack on the Cable
is very easy.
Box.
Note to the Cable TV System Installer: This reminder is provided to
call the Cable TV system installer's attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in
particular, specifying that the cable ground shall be connected to the ground-
ing system of the building, as close to the point of cable entry as possible.
Cable TV Company
Cable Box
All manuals and user guides at all-guides.com
H U Y
OOKING P OUR
Connect a coaxial
cable to the OUT TO
TV jack on the VCR
and to the ANT(enna)
IN jack on the TV.
The coaxial cable may be
supplied with the VCR.
OUT TO TV
IN FROM ANT.
VCR
If you do not have a
Cable Box, connect the
Cable TV signal directly to the
ANT(enna) IN jack on the TV.
If you have a Cable Box:
Use a coaxial cable to connect
the OUT jack of the Cable Box
to the ANT(enna) IN jack on
the TV.
NOTE: The coaxial cable
might be supplied by the Cable
TV company.
Cable TV Signal (75Ω)
OR
Coaxial cable
- 3 -
TV (C ' )
ONT D
Refer to the VCR
owner's manual for other
possible connections and for
operating details.
Coaxial cable
ANT. IN
AC 120V
DC 13.2V
Back of TV
ANT. IN
AC 120V
DC 13.2V
Back of TV
S
MART
H
ELP
To select
only the channels on
your Cable system,
see Auto Install
(page 5).
If you use a Cable
Box, set the TV to
the same channel as
the CH 3/4 switch
on the back of the
Cable Box and
select channels at
the Cable Box.