Operation - Scotsman FM2402 Service Manual

FM2402
OPERATION: Water
WATER INLET
DRAIN
ICE
CHUTE
Water enters the machine through the 3/8" male
flare at the rear of the cabinet, splits into two
separate lines, flows to a strainer at each reservoir
and then to each water reservoir which it enters
through the float valve. The water then goes out
the bottom of the reservoir tanks to the bottom of
each evaporator.
Reservoir overflow or evaporator condensation is
routed to the drain.
Water cooled models have a separate water circuit
for the cooling water: it enters the fitting at the rear,
divides and goes to the two water regulating
valves, then through each water cooled
condenser, reconnects into one drain and down
the drain.
RESERVOIR
WATER
LEVEL
STRAINER
EVAPORATOR
EVAPORATOR
DRAIN
WATER SCHEMATIC
August 1993
Page 14
ADJUSTMENT OF WATER LEVEL
EVAPORATOR INLET