Heat Sink; Removing The Heat Sink - Dell D15U001 Service Manual

Steps
1. Connect the fan cable to the connector on the system board.
2. Turn the fan assembly over.
3. Press the release tab on the fan assembly and place it on the system until it clicks into place.
Next steps
1. Install the speaker.
2. Install the side cover.
3. Follow the procedure in

Heat sink

NOTE: This section applies to 35 W and 65 W configuration systems.

Removing the heat sink

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the fan assembly.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 27