Scotsman CMS1002R User Manual page 26

CMS1002R
REMOVAL AND REPLACEMENT
//////////////////////////////WARNING//////////////////////////////////
Disconnect electrical power before beginning.
//////////////////////////////////////////////////////////////////////////////////
Water Pump
1. Remove front panel.
2. Remove evaporator cover.
3. Unplug water pump electrical connection.
ELECTRICAL
CONNECTION
DISCHARGE
HOSE
WATER
PUMP
REMOVAL OF THE WATER PUMP
4. Remove thumb screw retaining pump to cross
brace.
5. Pull pump partially out of reservoir and remove
discharge hose.
6. Remove two nuts holding pump cover to pump
body; separate the two and remove the pump from
the icemaker.
7. Reverse to reassemble.
8. Replace all panels.
9. Reconnect electrical power.
Inlet Water Solenoid Valve Assembly
To remove the inlet water solenoid valve assembly:
1. Shut OFF water supply to machine.
2. Loosen and remove outlet water line from the
inlet water solenoid valve assembly.
3. Remove screws and pull the water solenoid
valve out to gain access.
ELECTRICAL
CORD
OUTLET
TUBE
REMOVAL OF INLET WATER SOLENOID VALVE
4. Pull electrical cord from solenoid coil terminals.
5. Remove inlet water fitting from the water
solenoid valve. To replace the inlet water valve
assembly, reverse the removal procedures.
September, 1993
Page 26
INLET WATER
SOLENOID