Recording At Intervals (Time-Lapse Recording) - JVC Everio GZ-E110 Detailed User Manual

Recording at Intervals (TIME-LAPSE
RECORDING)
This function enables the changes of a scene that occur slowly over a long
period to be shown within a short time by taking frames of it at a certain
interval.
This is useful for making observations such as the opening of a flower bud.
Memo :
To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
1
Press MENU.
2
Select "TIME-LAPSE RECORDING" and press OK.
3
Select a recording interval (1 to 80 seconds) and press OK.
The greater the number of seconds, the longer the recording interval.
0
4
Start recording.
A frame is taken at intervals of the selected period.
0
When the recording interval is set to "20SEC INTERVAL" or higher,
0
this unit switches to the power-saving mode between recordings.
At the next point to record, the power-saving mode will be turned off
and recording will start automatically.
Press the START/STOP button again to stop recording.
0
Indications During Time-Lapse Recording
Display
Speed Indicator Displays the recording interval that is set.
Video Quality Displays the icon of the video quality that is set.
Remaining Remaining time left to record with the currently
Recording Time selected video quality.
Recording in Appears when video recording is in progress.
Progress When in the power-saving mode, it blinks.
Record-Standby Appears when video recording is paused.
Actual Elapsed Displays the actual elapsed time after recording
Time starts.
Recorded Time Displays the actual recorded time of the video.
Recorded time increases in units of frames.
Recording
Description
25