Recording At Intervals (Time-Lapse Recording) - JVC EverioR GZ-R495 Detailed User Manual

Recording
Setting
b OFF Deactivates image stabilizer.
Reduces camera shake under normal
a ON
shooting conditions.
Reduces camera shake more effectively
r ON (AIS)
when shooting bright scenes on the wide
angle end.
Only on the wide angle end (approx. 5x).
s (Enhanced AIS) The area of correction in the enhanced AIS
mode is greater than that in the AIS mode.
Camera shake can be reduced more
effectively even when recording is performed
by zooming from wide angle to telephoto.
Memo :
It is recommended to set the image stabilizer to "OFF" when shooting a
0
subject of little movement with the unit on a tripod.
Complete stabilization may not be possible if camera shake is excessive.
0
This setting is effective for video recording only.
0
Using the image stabilizer will narrow the angle of view.
0
Dynamic zoom is not available in the enhanced AIS mode.
0
The resolution for the enhanced AIS mode is lower compared to the other
0
modes.
40
Details
Recording at Intervals (TIME-LAPSE
RECORDING)
This function enables the changes of a scene that occur slowly over a long
period to be shown within a short time by taking frames of it at a certain
interval.
This is useful for making observations such as the opening of a flower bud.
1
Open the LCD monitor.
A
.
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
0
the mode switching screen.
Tap A to switch the mode to video.
2
Tap "MENU".
≪PLAY
.
The top menu appears.
0
3
Tap "RECORD SETTING".
TOP MENU
RECORD
SETTING
OFF
CONNECTION
SETTINGS
.
4
Tap "TIME-LAPSE RECORDING".
RECORD SETTING
.
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
REC MENU
SETUP