6. Disconnect the side I/O board cable and then remove the side I/O board.
7. Install the new side I/O board.
8. Reconnect the side I/O board cable. Reinstall the side I/O bracket.
9. Reinstall the removed parts in reverse order of the removal steps mentioned above.
10. Reconnect all disconnected cables to the computer and reconnect the power cord to the electric outlet.
System board shielding fence
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
.
Chapter 6
Hardware removal and installation
65