Table of Contents
Advertisement
TagA
TILE MATRIX
TagB
CARBON SAVING
COST
CARBON CONVERT
SETTING
CURRENCY
2
SETTING*
CURRENCY
CONVERT SETTING
HOURS RUNNING*
SELF COLOR
CORRECTION*
TagC
INFORMATION*
*2 This item will not be reset by FACTORY PRESET (Tag7).
The Tile Matrix feature allows one image to be displayed over multiple screens. This
feature can be used with up to 25 monitors (5 vertical and 5 horizontal). Using Tile Matrix
requires the PC output signal be sent through a distribution amplifi er to each individual
monitor.
H MONITOR: Select the number of horizontal displays.
V MONITOR: Select the number of vertical displays.
MONITOR No: Select a position to expand the screen.
TILE COMP: Works in tandem with Tile Matrix to compensate for the width of the tile
bezels in order to accurately display the image.
Tile Comp with 4 monitors (black area shows monitor frames):
monitor1
monitor3
Tile Comp OFF
NOTE: TILE MATRIX works only when PIP MODE is OFF.
Displays the estimated carbon savings information in kg.
Displays the electricity cost savings in balance.
Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is
based on the OECD (2008 Edition).
Displays electricity pricing (available in 6 currency units).
Adjusts electricity prices-electric energy equivalent in the electrical rate saving
calculation.
2
Show total running time.
Compensates for typical a LCD yellowish color shift due to long-term usage by internal
3
color sensor. This takes approximately 30 to 60 minutes depending on warm up time to
complete.
2
Provides information about the current display resolution. Technical data, including the preset
timing currently being used and the horizontal and vertical frequencies is also displayed.
monitor1
monitor2
monitor4
monitor3
Tile Comp ON
English-23
monitor2
monitor4
*3 MDview 241/271 only.
Advertisement
Table of Contents
