Advertisement
[All Settings] > [General]
[User Preset]
User Preset allows the user to save or load up to 10 picture quality settings for multiple connected devices in each preset.
NOTE
•
You can use User Preset to import or save items in [Picture Adjust] and [Color Adjust] of the [Picture] menu.
[User Name]
[Load User Settings]
[Save User Settings]
[Default User Settings]
[User Preset Reset]
[Auto Screen Off]
Automatically turns off the screen when there is no monitor signal for a set time period.
[On]
[Off]
[HW Calibration]
[RS-232C] and the [HW Calibration] cannot be used at the same time.
[On]
[Off]
[RS-232C]
[RS-232C] and the [HW Calibration] cannot be used at the same time.
[RS-232C]
[Set ID]
Explanation
Allows the user to change and register a user name (Preset 1 ~ Preset 3, User 1 ~ User 7) as the user wants.
The user can enter a user name to be registered by using the screen keyboard.
Preset 1 ~ Preset 3 are factory-set user names as samples and the user can change the names.
Allows the user to change the picture quality settings by loading the User Preset settings.
Saves the current picture quality settings in the corresponding User Preset.
Preset 1 ~ Preset 3 are factory-set values as samples and the user can change the values.
•
Preset 1: Use this preset for bluish color.
•
Preset 2: Use this preset for greenish color and brighter low-gradation.
•
Preset 3: Use this preset to soften the red tone.
•
User 1 ~ User 7: Initial values are the same as the factory settings.
Loads the initial basic picture settings.
Initializes User Preset settings.
•
Initializes the existing user name and user settings to be restored to factory settings (Preset 1 ~ Preset 3, User 1 ~ User 7).
Activates [Auto Screen Off] function.
Deactivates [Auto Screen Off] function.
The HW Calibration function will operate.
The HW Calibration function will be turned off.
The [RS-232C] function will be operated or turned off.
Adjusts [Set ID]. (The scope of adjustment: 1-10)
27
Advertisement
