Samsung SCC-B53X Series User Manual page 5

alternating-current line plug (a plug
having one blade wider than the other).
This plug will fit into the power outlet
only one way. This is a safety feature.
If you are unable to insert the plug fully
into the outlet, try reversing the plug.
If the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug. Alternate Warnings
– This product is equipped with a three-
wire grounding-type plug, a plug having
a third (grounding) pin. This plug will only
fit into a grounding-type power outlet.
This is a safety feature. If you are unable
to insert the plug into the outlet, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the grounding-type plug.
13. Power-Cord Protection – Power-supply
cords should be routed so that they are
not likely to be walked on or pinched
by items placed upon or against them,
paying particular attention to cords at
plugs, convenience receptacles, and the
point where they exit from the product.
14. Protective Attachment Plug – The
product is equipped with an attachment
plug having overload protection. This is
a safety feature. See Instruction Manual
for replacement or resetting of protective
device. If replacement of the plug is
required, be sure the service technician
has used a replacement plug specified
by the manufacturer that has the same
overload protection as the original plug.
15. Outdoor Antenna Grounding – If an
outside antenna or cable system is
48C(01)Eng.indd 5
connected to the product, be sure the
antenna or cable system is grounded so
as to provide some protection against
voltage surges and built-up static
charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size
of grounding conductors, location of
antenna-discharge unit, connection to
grounding electrodes, andrequirements
for the grounding electrode.
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC - NATIONAL ELECTRICAL CODE
16) Lightning – For added protection for this
product during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall
outlet and disconnect the antenna or
cable system. This will prevent damage
to the product due to lightning and
power-line surges.
ANTENNA LEAD
IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION S10-20)
GROUNDING CONDUCTORS
(NEC SECTION S10-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
5
2007-03-19 ¿ÀÀü