On-Screen Menu - Sanyo VHR-H619 Instruction Manual

ON-SCREEN MENU

Your new VCR is designed with user-friendly on-screen
menus to help you operate its many features.
Color-coded menus prompt you step-by-step through
operations by highlighting the sections awaiting your
entries.
Displaying the On-Screen Menus
1
Turn on the power (TV and VCR).
2
Set the TV to channel 3 or 4.
3
Press the VCR button on the remote control to select
the VCR operation mode.
4
If the VCR indicator is off, press the TV/VCR button
on the remote control.
The VCR indicator lights.
NOTE:
If the initial setup has not yet been
completed, the "Auto Setup" message will appear.
Follow steps 5 – 7 under "INITIAL SETUP" on page
15.
5
Press the MENU button on the remote control.
The main MENU appears.
@@@@@@@@@MENU
Timer@program
VCR@setup
Clock@set
Language@select
Rec.List@super
Auto@tuning@memory
[CH§‡]†Select
[SET]†OK@@@@@@[MENU]†TV
The menu items are color-coded as shown below:
œ Menu title:
œ Option selected:
œ Operations indications: On blue background
œ Others:
NOTE:
If the clock has not yet been set, the Clock
set menu appears. To set the clock, see "SETTING
THE CLOCK" on page 20.
Press the CH/TRACK l (or j ) button to select the
desired option, then press the SET button.
6
Press the MENU button to exit the menu.
Menu title
Option
selected
Operations
indications
On magenta background
Highlighted in green
On gray background
Main Menu Options
Reference pages are shown in square brackets.
Timer program [33 – 36]
œ Select this to program, check or cancel a timer
recording setting.
VCR setup [19]
œ Select this to set the VCR functions.
Clock set [20, 21]
œ Select this to set the clock or change the clock
setting.
Language select [22]
œ Select this to change the on-screen language.
Rec. List super [26, 27]
œ Select this to list the recordings on the tape
inserted in the VCR.
Auto tuning memory [22]
œ Select this to program the channels into the VCR's
tuner memory.
18