Fisher SLIM-3010 Instruction Manual page 10

OPERATING INSTRUCTIONS
POWER ON/OFF
When the AC power is connected, the clock shows on the LCD display.
1. Press the POWER button to turn the unit 'ON'.
Note: The LCD display lights up.
2. You can now select your desired music source
by pressing one of the function buttons:
TUNER/BAND or CD PLAY/PAUSE or AUX.
3.
To switch to POWER OFF, press the POWER
button.
The LCD display backlit goes off.
NOTE: Please turn off the unit to standby mode before disconnecting main power supply from the unit.
SETTING THE TIME
When the unit is first connected to AC power, the display shows "AM 12:00". To set the clock to the current
time proceed as follows:
1.
With unit at off mode, press the MEM/PROG
button once, the hour digits begin to flash.
2. Press the SKIP Forward or Backward buttons to
adjust the hour. Be sure to set the hour
correctly for AM or PM.
3. Press the MEM/PROG button again, the minute
digits begin to flash.
Press the SKIP Forward or Backward buttons to
4.
adjust the minute.
5. Press the MEM/PROG button once more, the
display stops flashing and the clock begins to
run.
POWER/STANDBY
Example : FM mode
POWER/STANDBY
MEMORY
MEMORY
MEMORY
17
TIMER ON/OFF SETTING
NOTE: The clock should be set before the Timer On/Off setting.
1. With unit at off mode, press the TIMER button once, the
TIMER ON indicator begins to flash.
2. Press the MEMORY/PROGRAM button once, the hour
digits begin to flash.
3. Press the SKIP forward or backward buttons to adjust
the hour. Be sure to set the hour correctly for AM or
PM.
4. Press the MEMORY/PROGRAM button again, the
minute digits begin to flash.
5. Press the SKIP forward or backward buttons to adjust
the minute.
6. Press the MEMORY button once more, the timer on
setting is finished.
Note: Timer "ON" indicator will stop flashing after about
3 seconds and then goes off.
Note: Timer function with Surewake starts the music
quietly and then increases the volume to room level to
make sure you awake (when SUREWAKE switch is set
at ON position).
7. Press the MODE button again, the TIMER OFF
indicator begins to flash.
8. Press the MEMORY button once, the hour digits begin
to flash.
9. Press the SKIP forward or backward buttons to adjust
the hour. Be sure to set the hour correctly for AM or
PM.
18