LG WD-1433RD Service Manual page 32

INLET VALVE
4
3
COVER LOWER
2
1
Cap(Remaining Hose)
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
holder.
When reconnecting the connector
VALVE (DRY)
VALVE (PRE-WASH)
VALVE (NORMAL-WASH)
VALVE (HOT)
① Remove the lower cover to arrow direction
after one screw is unscrewed.
Removing method of remained water
① Rotate the Cap(Remaining Hose) to arrow
direction.
② Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
31
YL/BK - BK
GY/WH - BK
WH/BK - BK
BL/RD - BK