Bosch PLM-8CS User Manual page 20

20 en | Connections
Number Item
11 Network
Warning!
The 12V DC power output (Auto Standby) connection should be only connected with
!
products in accordance with recommendations outlined in this manual.
Notice!
Recommended motion sensors for use with the auto standby mode are the Bosch range of
i
sensors.
For more information regarding Bosch security products contact your local Bosch Security
certified partner or go to www.boschsecurity.com for details.
Notice!
i
It is recommended that the cable used Amp Link cable is a high quality STP CAT‑5 (e) cable.
Amp Link cable distances should not exceed 5 meters per cable.
2020-12 | V1.1 |
Description
– RJ45 Ethernet communication socket:
– Communication with the PLENA matrix GUI application.
User manual
PLENA matrix
Bosch Security Systems B.V.