Roll Bar And Safety Belt; Before Starting; Starting The Engine - Husqvarna iZ Series Operator's Manual

Before Starting

• Read the sections "Safety Instructions"
and "Controls" before starting the
machine.
• Perform the daily maintenance before
startin"g (see Maintenance Schedule
in the Maintenance" section).
• Check that there is sufficient fuel in the
fuel tanks.
• Adjust the seat to the desired position.
The following conditions must be fulfilled
before the engine can be started:
• the driver must be seated on the seat,
• the blade switch for engaging the mower
blades must be depressed,
• the parking brake must be on,
• both steering controls must be in the
locked (outer) neutral position.

Starting the Engine

1. Sit on the seat.
2. Raise the mower deck by pulling the
lifting lever backward to the locked
position (transport position).
3. Activate the parking brake.
OPERATION
Start conditions
Raise the mower deck
8011-527
8011-552
25
English-