Ignition Switch
the ignition key is placed on the control panel and is
used to start and stop the engine.
Choke Control
the choke control is used for cold starts in order to
provide the engine with a richer fuel mixture.
for cold starts on models with separate choke, the
control should be pulled up. On models with the a
throttle/choke, the control should be pushed fully
forward to the choke position.
Fuses
fuses are located on the left hand side of the
machine. they are accessed by tilting the seat
forward. they are flat pin fuses of the same type used
in automobiles.
there are two fuses with ratings and functions:
20 Amp Primary fuse
7.5 Amp mower deck coupling
20
COntROlS
Ignition switch
Choke control
Fuses
8052-001
8052-001
8011-420