Sanyo DVW-7100 Instruction Manual page 33

Troubleshooting (Continued)
Symptom
Some channels are
skipped over when
using CH/TRK (v/V)
Picture and sound of
broadcasting channel
are weak or missing.
Camcorder image is not
shown.
Camcorder image via
A/V input to DVD+VCR
is not shown on TV
screen.
Timer recording is not
possible.
indicator appears
after DVD+VCR is turned
off.
The "PROGRESSIVE
SCAN MODE" message
remains to be
displayed.
The HiFi-videotape
cannot be played back
in stereo.
Moisture condensation can occur:
• When the DVD+VCR is moved from a cold place to a
warm place.
• Under extremely humid conditions.
Cause
Those channels were deleted with the
CH. ADD/DEL option.
Antenna or cables are loose.
Wrong TUNING BAND option is being
used.
Camcorder is off.
DVD+VCR SOURCE SELECT is not set
to LINE1 or LINE2.
Clock in DVD+VCR is not set to correct
time.
Timer has been programmed
incorrectly.
indicator does not appear after pro-
gramming timer.
DVD+VCR is in Timer Recording mode.
DVD+VCR was turned off while setting
the Progressive scan mode.
This unit can play back videotape
recorded in stereo, but the playback
sound turns to be monaural.
Moisture Condensation
Use CH. ADD/DEL. to restore channels.
See "Channel Selection" on page 15.
Tighten connections or replace cable.
Try all TUNING BAND options. See
"Channel Selection" on page 15 for
details.
Turn camcorder on and operate
properly.
Press INPUT to select LINE input chan-
nel (LINE1 or LINE2).
Set clock to correct time. See "Setting
the Clock" on page 16.
Reprogram Timer. See "Timer
Recording" on pages 22 and 23.
Reprogram Timer.
This is the normal indication that the
DVD+VCR is in TIMER mode.
Keep pressing the STOP button for
more than 5 seconds.
_____________
In locations where moisture condensation may occur:
• Keep the DVD+VCR plugged into an AC power outlet
with POWER On. This will help prevent condensation.
• When condensation has occurred, wait a few hours
for the DVD+VCR to dry before using it.
Correction
33