Advertisement

Quick Links

OWNER'S MANUAL
VACUUM CLEANER
Make sure to read the "SAFETY INSTRUCTIONS" carefully
before starting to use this product. Please keep this Owner's
Manual within easy reach of the user. As the product is only
intended for domestic use such as household cleaning, it
must not be used for commercial, experimental or industrial
purposes. Make sure to fully charge the product's battery
before first use of the product after purchasing it.
ENGLISH
A9K**********
MFL69883656
Rev.04_102121
Copyright © 2020-2021 LG Electronics Inc. All Rights Reserved.
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG A9K Series

  • Page 1 Make sure to fully charge the product’s battery before first use of the product after purchasing it. ENGLISH A9K********** www.lg.com MFL69883656 Rev.04_102121 Copyright © 2020-2021 LG Electronics Inc. All Rights Reserved.
  • Page 2: Table Of Contents

    OPERATION Getting Started ....................20 Charging the Battery ..................22 Using the Mop Nozzle ..................23 Using the Nozzles and Tools................26 SMART FUNCTIONS Using LG ThinQ Application................29 Smart Diagnosis Function................31 MAINTENANCE Cleaning the Appliance ...................32 Cleaning the Nozzles ..................35 TROUBLESHOOTING Before Calling for Service................39...
  • Page 3: Safety Instruction

    SAFETY INSTRUCTION SAFETY INSTRUCTION READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk.
  • Page 4 If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an LG Electronics service centre. • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
  • Page 5 SAFETY INSTRUCTION • When disposing of this appliance, follow regulations for disposal of rechargeable lithium-ion batteries. • Follow all local ordinances and regulations when handling or disposing of the battery. • Prevent unintentional starting. Ensure the switch is in the off position before connecting to the battery pack, picking up or carrying the appliance.
  • Page 6 SAFETY INSTRUCTION • Avoid operating the appliance in areas where there is a risk of leakage of flammable gas, industrial oil or metallic dust. • Do not store or install the appliance, power cord or plug near heating devices or open flames. •...
  • Page 7 • Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Take it to an authorized LG Electronics service centre or dealer for assistance. • Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it.
  • Page 8 • If the earth leakage breaker is tripped when the product is put on the charging station, immediately remove the appliance from the charging station. Contact an LG Electronics customer service centre. • Use extra care when cleaning on stairs.
  • Page 9 SAFETY INSTRUCTION • Do not hold the charging station upside down with the battery in the charging station. • Do not expose the appliance, and the battery in particular, to heat, a heating device or direct sunlight. • Do not keep the appliance or its battery inside a vehicle which is exposed to direct sunlight.
  • Page 10: Caution

    SAFETY INSTRUCTION Mop Nozzle • Do not vacuum sharp objects (glass pieces, wire, blades, pins, etc.) with the mop nozzle attached. When cleaning the mop pads after mopping, you could be injured by a sharp object embedded in the mop. CAUTION CAUTION •...
  • Page 11 SAFETY INSTRUCTION Mop Nozzle • Do not use the mop nozzle for any purpose(for example, polishing a car, cleaning windows) other than domestic floor cleaning. • Do not use the mop nozzle to vacuum up liquids(water, beverage). • When using the mop nozzle, always attach the mop pads. •...
  • Page 12: Installation Product Overview

    INSTALLATION INSTALLATION Product Overview The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View *1 This feature is only available on some models. Charging Station Tool Holders Auxiliary Charging Station...
  • Page 13 INSTALLATION Accessories Nozzles *1 This accessory is only available on some models. Included Accessories Multi-Surface Nozzle Slim Hard Floor Nozzle Bedding Nozzle Pet Nozzle Installation Kit Charging Station Extension Pipe Adapter Wall Anchoring Block Pre-filter Double-Sided Tape Battery (Dual Battery Drywall Anchor Floor Stand Dock Wall Anchoring Screw...
  • Page 14 Measuring Cup Flexible Hose Extension NOTE Accessory Bag • The mop pads, batteries, exhaust filter and the pre-filter will eventually need to be replaced. Mop Kit Contact an LG Electronics customer service centre. Specifications Appliance Model A9********** Dimensions (Width X...
  • Page 15 Individually measured data would be different from a lab test result. • Battery run time is the result of using a fully charged battery according to the LG Electronics test standard. Results may be different depending on actual use environment and period of use.
  • Page 16: Installing The Charging Station

    INSTALLATION Installing the Charging Assemble the charging station onto the top of the floor stand pipe. Station Self-Standing Installation Follow the steps below to install the charging station on a hard and level floor. Place the floor stand dock on a hard and level floor and assemble the floor stand pipe.
  • Page 17 INSTALLATION to the wall by tightening the anchoring screw Attach the second piece of double-sided tape all the way. to the other side of the wall anchoring block to secure it to the wall. • Do not use double-sided tape on wallpaper. Plug the power cord into the power outlet.
  • Page 18: Storing The Accessories

    INSTALLATION • If screwing into drywall, use the drywall Separate the extension pipe and nozzle from anchors. the product body before charging or storing the appliance. Plug the power cord into the power outlet. CAUTION Attach the charging station to the wall with the •...
  • Page 19 INSTALLATION Storing the Nozzles Storing the Mop Pads When a nozzle is not in use, store it in the Up to 2 mop pads can be stored in the detachable convenient detachable nozzle storage so you can mop pads storage. easily find it.
  • Page 20: Operation Getting Started

    • Detach the accessories by pressing the and humidity may cause static electricity to release button accumulate on the appliance. Please contact LG Electronics customer information centre if the problem persists. • Make sure to remove any foreign object such as a sock or stocking before using the appliance.
  • Page 21 Turbo mode from Power • This indicator blinks when the appliance is mode. connecting to the LG ThinQ application or home Wi-Fi network, and the indicator lights Suction Power Down (-) Button / Wi-Fi Mode up when the connection is complete.
  • Page 22: Charging The Battery

    OPERATION Charging the Battery • If you don't hear a beep, reload the appliance on the charging station. Before Charging the Battery • Make sure that the adapter is connected to both the charging station and the power outlet. • Fully charging a single battery usually takes 4 hours.
  • Page 23: Using The Mop Nozzle

    • Do not use a soiled mop pad to clean floors. (recommended duration of use: 80 minutes). • Use only authorized LG Electronics mop pads. When the moter overheats, the overheating prevention function is activated and the •...
  • Page 24 OPERATION Open the water inlet cap on the side of the • Attaching and using mop pads while they water tank and fill the tank with water using are dry may affect the cleaning results. the measuring cup • Open only one water inlet cap to fill the water.
  • Page 25 OPERATION position. This stops the supply of water so you a soft cloth. The water could drip onto the floor can go over areas that are already wet. and damage it. WARNING • To avoid injury, do not attach the mop pad while the mop attachment plate is rotating.
  • Page 26: Using The Nozzles And Tools

    OPERATION nozzle, making it difficult to operate, causing CAUTION damage to the mat or static electricity on the appliance. Clean mats using the crevice tool. • Do not use as follows, as it may become deformed. - Do not use bleach or fabric softener when washing the mop pads.
  • Page 27 OPERATION Bedding Nozzle • Brush Mode Use the tool in the brush mode to clean delicate This nozzle lets you clean sheets and bedding more surfaces such as frames or furniture. effectively. It removes dust in bedding using strong - To convert modes, press the adjustment suction and a punching motion.
  • Page 28 OPERATION Multi-angle Tool vehicles or in narrow spaces under and behind furniture where an angled tool is needed. This tool has a soft brush that can be adjusted to a variety of angles, making it especially useful for cleaning vehicle consoles or the tops of furniture. Using the Brush To convert the tool from crevice to brush mode, press in on the sides of the brush head...
  • Page 29: Smart Functions

    • If you change your wireless router, Internet wireless router manual. service provider, or password, delete the • LG ThinQ is not responsible for any network connected appliance from the LG ThinQ connection problems or any faults, application and connect it again.
  • Page 30 Connecting the Appliance Initially before trying again. Select your appliance on menu by pressing the Add a Product (+) button. Follow instructions in the LG • If the firewall on your wireless router is enabled, ThinQ to connect your appliance.
  • Page 31: Smart Diagnosis Function

    Statement • Once set, the default operation mode is RF Radiation Exposure Statement This equipment maintained until the setting is changed in the LG complies with radiation exposure limit (<4.0 W/kg ThinQ application. for extremity (hand) exposure condition) set forth for an uncontrolled environment.
  • Page 32: Maintenance

    MAINTENANCE MAINTENANCE Cleaning the Appliance battery from the product body and remove the foreign objects before resuming use of the appliance. Before Cleaning the Appliance • Check the inside of the product body, above the To maintain the optimum suction power, the Kompressor working plate, the extension pipe, cyclonic mesh filter, the exhaust filter and the pre- inlets, exhaust filter, pre-filter and cyclonic mesh...
  • Page 33 MAINTENANCE Remove the battery from the product body • Do not force the Kompressor lever down if before cleaning the dust bin. foreign objects are caught around the working plate of the Kompressor system. Doing so may cause product damage. Push down the Kompressor lever several times to collect and compact the dust from the...
  • Page 34 MAINTENANCE Cleaning the Filters Turn the product body over and lift the Kompressor lever up to clean the inside of Clean the exhaust filter and the pre-filter when the the working plate with the provided cleaning brush. filter cleaning icon lights up.
  • Page 35: Cleaning The Nozzles

    MAINTENANCE • Do not wash the motor with water. the nozzle starts to operate during cleaning, it could cause an injury. • Keep fingers away from pinch points when assembling the nozzle on the appliance or the rotating brush on the nozzle. •...
  • Page 36 MAINTENANCE Attach the crevice tool to the product body and Turn the nozzle upside down and remove the use the vacuum to remove foreign objects and rotating brush while holding down the PUSH dust from the brush and the bottom of the button on the nozzle.
  • Page 37 MAINTENANCE Cleaning the Pet Nozzle Insert the left side of the brush into the groove inside the nozzle. Press the nozzle release button to remove the nozzle from the extension pipe or product body. Press the cover of the brush to lock the brush until a clicking sound is heard.
  • Page 38 MAINTENANCE Use a damp towel or cloth to remove any remaining foreign objects and dust from the bottom of the mop nozzle. Remove foreign objects, debris and hair from all Rollers of the nozzles using tweezers.
  • Page 39: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING Before Calling for Service Operation Symptoms Possible Cause & Solution The appliance does not Battery is fully discharged. operate. • Charge the battery. Appliance is turned off. • Press the Power button to turn on the appliance. Suction power is too Dust bin is full of dust.
  • Page 40 LG customer information centre for service. repeatedly. Foreign object is in the product body, extension pipe, inlet port or nozzle.
  • Page 41 TROUBLESHOOTING Mop Nozzle Symptoms Possible Cause & Solution The mop pad Mop pads are improperly installed. attachment plate does • Remove the mop pads, clean them if necessary and attach them again. not rotate. Mop nozzle is pressed too hard against the floor. •...
  • Page 42 Your home appliance Battery is fully discharged. and smartphone are • Charge the battery, then register your appliance on LG ThinQ. not connected to the Wi-Fi network. The password for the Wi-Fi that you are trying to connect to is incorrect.
  • Page 43 Memo...

Table of Contents