Table of Contents
Advertisement
Getting to know your appliance
en
Rotary selector
You can use the rotary selector to change the
adjustment values shown on the display.
In most selection lists, such as the temperature, you
have to turn the rotary selector back the other way if
you reach the minimum or maximum value. However,
for the heating types for example, the first selection
follows the last.
Display
The display is structured so that the information can be
read at a glance in any situation.
The value that you can currently set is highlighted. It is
displayed in white lettering and underlined in white. The
value in the background is displayed in grey text.
Highlighted infor-
The highlighted value can be changed immedi-
mation
ately without first being selected.
After starting an operation, either the temperature
or level remains highlighted. The white line also
serves as the heating line and gradually turns red.
Note:
When using the Microwave operating
mode, the cooking time is highlighted. The heating
line does not appear.
Enlargement
As long as you use the rotary selector to change
the highlighted value, only this value will be dis-
played larger.
Display ring
The display ring can be found around the outside of the
display.
If you change a value, the display ring shows you where
you are in the selection list. Depending on the settings
area and length of the selection list, the display ring
may be continuous or divided into segments.
During operation, the display ring turns red at second-
long intervals. After every full minute, the segments turn
red again from the beginning. As the cooking time
counts down, one segment disappears every second.
10
Temperature display
After the operation has started, the current cooking
compartment temperature is displayed graphically on
the display.
Heating line
The white line under the temperature turns red from
left to right as the cooking compartment heats up.
When you are preheating the appliance, the optimal
time to place the food in the cooking compartment
is when the line has completely turned red.
For set levels, e.g. the grill setting, the heating line
turns red immediately.
Residual heat
When the appliance is switched off, the display ring
indicator
shows the residual heat in the cooking compart-
ment. As the residual heat cools down, the display
ring becomes darker and disappears completely at
some point.
Due to thermal inertia, the temperature displayed
Note:
may be slightly different to the actual temperature inside
the oven.
Operating modes
Your appliance has various operating modes which
make your appliance easier to use.
You can find more precise descriptions of these in the
corresponding sections.
Operating mode
Heating types
~ "Operating the appliance"
on page 15
AutoCook
~ "Dishes" on page 28
Microwave
~ "Microwave" on page 18
MicroCombi
~ "Microwave" on page 18
--------
Use
There are various finely tuned heating
types for the optimal preparation of
your food.
There are preprogrammed setting val-
ues which are suitable for many
dishes.
You can use the microwave to cook,
heat up or defrost your dishes more
quickly.
You can use the microwave combina-
tion function to switch on the micro-
wave and a type of heating.
Advertisement
Table of Contents
