HP t628 Troubleshooting Manual page 40

5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys
to select the option you want, then press enter. To return to the Computer Setup Utilities menu, press
esc.
6. To apply and save changes, select File > Save Changes and Exit.
● If you have made changes that you do not want applied, select Ignore Changes and Exit.
● To reset to factory settings, select Apply Defaults and Exit. This option will restore the original
factory system defaults.
CAUTION:
because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup
screen.
Heading
File
Storage
Security
Power
Advanced
34 Appendix A Computer Setup (F10) Utility, BIOS Settings
Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes
Table
Computer Setup—File on page 35
Computer Setup—Storage on page 36
Computer Setup—Security on page 37
Computer Setup—Power on page 39
Computer Setup—Advanced on page 39