JVC EverioR GZ-RY980 Detailed User Manual page 96

Using Wi-Fi
Starting Distribution
o
1
Perform the necessary setting for the decoder and PC application.
For more details on the settings, please refer to the instruction manual
of the respective devices and applications.
Memo :
If there are devices such as an NAT router within the communication path
0
between the camera and the decoder, port forwarding setup is required.
For more details on the settings, please refer to the instruction manual of
the router in use.
– The following setting values are required when connecting to this camera
using RTSP/RTP.
Port number: 554
Stream ID: stream
– Use the following to access via URL.
Rtsp://<IP address of the camera>:554/stream
2
Connect the camera to the network via Wi-Fi.
"Preparing for Connection" (A p. 79)
3
Set "Live Streaming" to "On".
Set "MENU"F"System"F"Network"/"Settings"F"Live Streaming
Set"F"Live Streaming" to "On".
The network connection mark appears on the LCD monitor screen
0
when a network connection is established.
"Network Connection" (A p. 128)
A
SLOT
PLAY
.
Memo :
You can view the status of distribution on the LCD monitor.
0
Icon
Distribution in progress (good connection quality)
Blinks when distribution starts or stops
.
(Red)
Distribution in progress (poor connection quality)
.
(Red)
Waiting for connection (during RTSP/RTP) or connection
failed
.
(Yellow)
When 5 is displayed, the error description is displayed on the
0
"STATUS"F"Network" screen.
Network
Type
SSID
Security Type
Passphrase
IP Address
MAC Address
Live Streaming
Multicast Is Not Supported
.
Caution :
Streaming may be interrupted temporarily 24 hours after the process
0
started.
96
STBY TC 00 : 00 : 00 . 00
2018 - 01 - 01
02 : 23 : 01
REC MENU
Status
Direct Connection
RY980- ****
WPA2
192.168.0.1
Cause of
Error