Checking The Remaining Battery Level And Recording Time - JVC EverioR GZ-RY980 Detailed User Manual

Recording
Checking the Remaining Battery Level and
Recording Time
Display the remaining battery power and the remaining recording time.
Memo :
The remaining battery power and the remaining recording time are
0
estimates.
Recording Mode
1
Tap "MENU".
SLOT
PLAY
.
2
Select "Monitor" with 3 or 2, followed by tapping "SET".
Monitor...
.
3
Select "Display Settings" with 3 or 2, followed by tapping "SET".
Display Settings...
.
4
Select "Media Remain" or "Battery" with 3 or 2, followed by tapping
"SET".
Media Remain
.
5
Select "On" with 3 or 2, followed by tapping "SET".
.
To exit the menu, tap L.
0
48
STBY TC 00 : 00 : 00 . 00
2018 - 01 - 01
02 : 23 : 01
REC MENU
On
On
Off
Remaining Recording Time, Battery Level
100%
54min
A
B - - - min
SLOT
PLAY
.
The white SD card icon indicates the slot that is currently selected.
0
When the battery level is running low, the battery icon and the battery level
0
indicator changes to the following colors.
- When battery level is 30% or lower: yellow color
- When battery level is 10% or lower: red color
Charge the camera as soon as possible when the icon and indicator turn
red.
When the battery power runs out, a "RES" mark (red) appears.
Charge the camera immediately.
The remaining recording time is displayed in red color when it falls below
0
3 minutes.
Replace the SD card with a new one.
Recording cannot be performed when the recordable time is not displayed
0
and the following message appears.
Check the SD card when this occurs.
SD card is write-protected
L
! INVALID Writing/Reading error or unable to restore SD card
The SD card inserted does not meet the speed class
! INCORRECT
requirements
An SDHC card is inserted when [4 GB Spanning] is set
to [Off (SDXC)]
!REC INH
An attempt has been made to record video in 60p or
60i to an SD card recorded in 50p or 50i in [AVCHD],
and vice versa.
Memo :
If the remaining time and battery indicator display disappears, tap n.
0
When an AC adapter is connected while "System" is set to "4K" or "High-
0
Speed", the battery level indicator will not be displayed.
If an AC adapter is connected while "System" is set to "HD" and the battery
0
is not fully charged, O is displayed instead of the battery level indicator.
STBY 00 : 00 : 00 . 00
2018 - 01 - 01
02 : 23 : 01
REC MENU