Table of Contents
Advertisement
CONNECTION TO THE MAINS SUPPLY
For UK use only – PLUG
• As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
• The
GREEN/YELLOW
to the terminal which is marked with the letter E or by the earth
symbol or coloured
• The
BLUE
wire is the NEUTRAL and must be connected to the
terminal marked with the letter N or coloured BLACK.
• The
BROWN
terminal marked with the letter L or coloured RED.
• Always ensure that the plug cord grip is fastened correctly.
• If a 13A (BS1363) fused plug is used it must be fitted with a
13amp fuse conforming to BS1362 and be BSI or ASTA approved.
To replace the 13amp fuse, remove the plug from the socket,
remove the fuse cover near the pins of the plug, remove the fuse
and replace with 13amp fuse. Refit the fuse cover and plug the unit
back into the power supply.
If the fuse cover is lost the plug must not be used until a
replacement is obtained from an electrical supplier.
If you need to remove the plug, cut it from the mains lead and
dispose of it. NEVER attempt to re-use this plug or insert it into a
socket outlet, as there is a very great risk of electrical shock.
wire is the EARTH and must be connected
GREEN
or GREEN/YELLOW.
wire is the LIVE wire and must be connected to the
36
Advertisement
Table of Contents
