Sanyo PLV-70 Owner's Manual page 35

QUIT
The COLOR MANAGEMENT menu will be exited and the display will
return to the normal projection screen, but any settings that have
been changed will not be stored. To store the changed settings, be
sure to select "LIST" using the POINT buttons and change to the
next mode (LIST mode).
LIST MODE
The check mark will be cleared and the effect of the setting adjust-
ment for that line on the projected images will be momentarily can-
celed.
COLOR PALETTE
The mode will return to COLOR SELECTION mode so that you can
re-adjust the setting for the color in that line. This option is not avail-
able if the check mark has been cleared by the operation immediate-
ly above.)
DEL
The setting adjustment for the color in that line will be canceled.
ALL DEL
The setting adjustment for the colors in all lines will be canceled.
COLOR M.
The mode will return to POINTER mode.
Auto picture control
Press either POINT LEFT button or POINT RIGHT button to Auto
picture control position that you want to select . (Off, L1 or L2)
Off ······· Auto picture control OFF position.
L1 ········ Auto picture control LEVEL 1 position.
L2 ········ Auto picture control LEVEL 2 position.
Color temp.
Press either POINT LEFT button or POINT RIGHT button to Color
temp. level that you want to select. (XLow, Low, Mid or High)
White balance (Red)
Press POINT LEFT button to lighten red tone and POINT RIGHT
button to deeper tone. (From 0 to 63.)
White balance (Green)
Press POINT LEFT button to lighten green tone and POINT RIGHT
button to deeper tone. (From 0 to 63.)
White balance (Blue)
Press POINT LEFT button to lighten blue tone and POINT RIGHT
button to deeper tone. (From 0 to 63.)
Sharpness
Press POINT LEFT button to soften image, and POINT RIGHT
button to sharpen image. (From 0 to 15.)
Gamma
Press either POINT LEFT button or POINT RIGHT button to obtain
better balance of contrast. (From 0 to 15.)
Noise reduction
Press POINT LEFT/RIGHT button(s) to change noise reduction
mode. Dialog box display is changed to "On" to reduce noise (rough
parts) of image. Press POINT LEFT/RIGHT button(s) again, to
change noise reduction mode to off.
LIST MODE
COLOR PALETTE
ALL DEL
MENU
NOTE;
If you press the COLOR M. button on the remote
control, the COLOR MANAGEMENT menu will be
exited and the display will return to the normal
projection screen, but any settings that have been
changed will not be stored. To store the changed
settings, be sure to select "MENU" using the
POINT buttons and store the settings.
Press SELECT button at this icon
to display previous items.
Mid
32
32
Press POINT LEFT/RIGHT buttons
32
to adjust value.
15
8
On
On
Press SELECT button at this icon to
store value.
Progressive scan
Press POINT LEFT/RIGHT button(s) to change
progressive scan mode. Dialog box display is
changed to "Off" and progressive scan mode to off.
Press POINT LEFT/RIGHT button(s) again,
progressive scan mode to on.
NOTE :
Tint cannot be adjusted when video system is PAL,
SECAM, PAL-M or PAL-N.
Progressive cannot be operated when "480p",
"575p" or "720p" is selected on AV SYSTEM MENU
(P32).
VIDEO INPUT
DEL
COLOR M.
35