Adjusting The Image; Zoom Adjustment; Focus Adjustment; Keystone Adjustment - Sanyo PLC-XU22N Owner's Manual

Press the ZOOM button on the Top Control or the ZOOM
1
button on the Remote Control Unit to turn into the ZOOM
mode.
2 Press the POINT UP button or the ZOOM
image larger, and press the POINT UP button or the ZOOM
button to have the smaller.
In the Computer mode, the image can be expanded, compressed,
and panned with the Digital Zoom function. Refer to page 29, 37 for
the Digital Zoom operation.
1 Press the FOCUS button on the Top Control or the FOCUS
/ button on the Remote Control Unit to turn into the FOCUS
mode.
Adjust the focus of the image by pressing the POINT
2
UP/DOWN button or the FOCUS
If the picture obtained keystone distortion, correct screen with KEYSTONE adjustment.
Press the KEYSTONE
1
or select the Keystone on the SCREEN menu. (Refer to page
29, 30, 37.) The message "Keystone" is displayed.
2 Correct the Keystone distortion by pressing the KEYSTONE
/ button or the POINT UP/DOWN button(s). Press the
KEYSTONE button or the POINT UP button to reduce the
upper part or the image, and press the KEYSTONE
the POINT DOWN button to reduce the lower part.
Reduce the upper width with the KEY STONE
button or the POINT UP button.
Reduce the lower width with the KEY STONE
button or the POINT DOWN button.

ADJUSTING THE IMAGE

ZOOM ADJUSTMENT

button to have the

FOCUS ADJUSTMENT

/ button.

KEYSTONE ADJUSTMENT

/ button on the Remote Control Unit
button or
/
Zoom
The message disappears after 4 seconds.
Focus
The message disappears after 4 seconds.
Keystone
The message disappears after 4 seconds.
BASIC OPERATION
21