Top Controls And Indicators - Sanyo PLC-XU22N Owner's Manual

BEFORE OPERATION
AUTO IMAGE BUTTON
Used to operate AUTO
IMAGE function. (P28)
POWER ON–OFF BUTTON
Used to turn the projector
on or off. (P20)
LAMP INDICATOR
This indicator is lit in dim
when the projector is
turned on. And the light is
brightened when the
projector is in stand-by
mode.
READY INDICATOR
This indicator is lit in green
when the projector is ready
to be turned on.
WARNING TEMP. INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
(P42)
LAMP REPLACE INDICATOR
This indicator turns to
yellow when the life of the
projection lamp draws to an
end. (P43)
MENU BUTTON
Used to open or close the
MENU operation.
(P17, 19)
16

TOP CONTROLS AND INDICATORS

LAMP
READY
ON–OFF
WARNING
TEMP.
LAMP
REPLACE
PAGE VOLUME
NORMAL
AUTO IMAGE
MENU MODE
SELECT
ZOOM FOCUS
NORMAL BUTTON
Used to reset to normal
picture adjustment preset
by factory. (P27, 31, 36)
PAGE BUTTONS
Used to move to the next /
previous page of the data in
the memory card plugged
into PC CARD SLOT.
These buttons are used to
stop or resume AUTO-
PLAY function. Page
buttons are activated in
MCI mode. (P34.)
VOLUME BUTTONS
Used to adjust volume.
(P22)
MODE BUTTON
Used to select input source
among Computer, Video or
MCI. (P23, 30, 33)
SELECT BUTTON
Used to execute the item
selected. It is also used to
expand the image in
DIGITAL ZOOM mode.
(P29, 37)
POINT BUTTONS
Used to select an item and
adjust the value on the
MENU. It is also used to
pan the image in DIGITAL
ZOOM mode. (P29, 37)
FOCUS BUTTONS
Used to select focus adjust.
(P21)
ZOOM BUTTONS
Used to select zoom adjust.
(P21)