Sony Cyber-shot DSC-H200 User Manual page 161

Cyber-shot User Guide
Before Use
Confirming the operation
method
Shooting
Viewing
Useful shooting functions
Useful viewing functions
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Troubleshooting > Warning indicators and messages > Messages
Messages
If the following messages appear, follow the instructions.
The battery level is low. Insert new batteries or charged Nickel-Metal Hydride batteries (sold
separately). Depending on the conditions of use or the type of battery, the indicator may flash even
though there are still 5 minutes to 10 minutes of remaining battery time left.
System error. Turn on the device again.
Turn the power off and then on again.
Internal memory error
Turn the power off and then on again.
Reinsert the memory card.
The inserted memory card cannot be used in the camera.
The terminal section of the memory card is dirty.
The memory card is damaged.
Incompatible type of memory card.
The inserted memory card cannot be used in the camera.
Buffer overflow. Writing to the media was not completed in time.
If you use a memory card that has been recorded and erased repeatedly, or that was formatted on a
different camera, the data writing speed may be too slow. First back up any data on the card to a
computer, and then reformat the card before using it.
The writing speed of the memory card you are using is not sufficient for movie recordings. Use one of
the memory cards listed below.
"Memory Stick PRO Duo" (Mark2) media, "Memory Stick PRO-HG Duo" media or "Memory Stick
Micro" (Mark2) media
SD memory card, SDHC memory card, microSD memory card or microSDHC memory card (Class
4 or faster).
Cannot recognize the internal memory. Format and use again.
Cannot recognize this memory card. Format and use again.
Format the media again. [Details]
161
Search
[Details]
[Details]
[Details]
Print