Volvo V90 TWIN ENGINE 2017 Owner's Manual page 588

LOADING, STORAGE AND PASSENGER COMPARTMENT
Fitting and removing the safety net*
The safety net prevents loads from being thrown
forward in the passenger compartment in the
event of sudden braking.
The safety net is fitted into four mounting points.
For reasons of safety, the safety net must always
be fastened and anchored as described below.
The net is made of a strong nylon fabric and can
be secured two different locations in the car:
•
Rear fitting - behind the rear seat.
•
Front fitting - behind the front seats.
WARNING
Loads in the luggage compartment must be
anchored well, and also using a correctly fit-
ted safety net.
586
Fitting the safety net
Rear fitting
1. If necessary, fold the rear seat backrests for-
ward in order to facilitate installation.
2. Lower the safety net cassette's end pieces
over the mounting eyelets in the recess of
the side panels. Press down the end piece
one side at a time. Check that the cassette is
properly secured.
3. Pull up the net.
4. Hook one of the safety net's retaining hooks
into the rear roof mounting and then press it
forward to the end position.
5. Hook the other of the safety net's retaining
hooks on the opposite side and press it for-
ward to the end position.
Front fitting
1. Fold the rear seat's backrest forward.
2. Align the safety net cassette's anchor rails in
front of the backrest's attachment lugs.
3. Slide the cassette into the attachment lugs.
4. Pull up the net.
5. Hook one of the safety net's retaining hooks
into the front roof mounting and then press it
forward to the end position.
6. Hook the other of the safety net's retaining
hooks on the opposite side and press it for-
ward to the end position.
Removing the safety net
1. Undo the safety net from the roof mountings
by pressing the retaining hooks backwards.
Allow the net to roll into the cassette.
* Option/accessory.