Volvo V90 TWIN ENGINE 2017 Owner's Manual page 136

DISPLAYS AND VOICE CONTROL
||
Global settings
The global settings and parameters are not
changed when changing between driver profiles.
They remain the same regardless of which driver
profile is active.
Keyboard layout settings are an example of
global settings. If driver profile X is used to add
additional languages to the keyboard, these
remain available for use even if driver profile Y is
used. The keyboard layout settings are not saved
to a specific driver profile - the settings are
global.
Personal preferences
If driver profile X was used to e.g. set centre dis-
play brightness, driver profile Y is not affected by
this setting. It has been saved to driver profile X -
the brightness setting is a personal setting.
Related information
•
Selecting driver profile (p. 134)
•
Renaming a driver profile (p. 135)
•
Resetting settings in the driver profiles
(p. 135)
•
Linking remote control key to driver profile
(p. 135)
•
Table showing centre display settings
(p. 132)
134
Selecting driver profile
When the centre display has been started, the
selected driver profile is shown at the top of the
screen. The driver profile last used is the one
that will be active next time the car is unlocked. It
is possible to change to another driver profile
after the car has been unlocked. However, if the
remote control key has been linked to a driver
profile then this is what is selected when the car
is started.
There are two options for changing to another
driver profile.
Option 1:
1. Tap on the name of the driver profile shown
in the top of the centre display when the dis-
play has been started.
> A list of selectable driver profiles is shown.
2. Select the driver profile required.
3. Press Confirm .
> The driver profile is selected and the sys-
tem loads the settings for the new driver
profile.
Option 2:
1. Drag down the top view in the centre display.
2. Press Profile .
> The same list as for Option 1 is shown.
3. Select the driver profile required.
4. Press Confirm .
> The driver profile is selected and the sys-
tem loads the settings for the new driver
profile.
Related information
•
Driver profiles (p. 133)
•
Navigating in the centre display's views
(p. 111)
•
Renaming a driver profile (p. 135)
•
Linking remote control key to driver profile
(p. 135)