Wire Feeder Options - Lincoln Electric Vantage 435 Operator's Manual

VANTAGE ® 435 ACCESSORIES

WIRE FEEDER OPTIONS

™
LN-25 IRONWORKER WIRE FEEDER
Portable CV unit for flux-cored and mig welding with maxtrac ® wire drive
system. includes digital meters for wire feed speed/amperage
and voltage, gas solenoid, internal contactor and 5/64 in. (2.0 mm) drive
roll kit for cored wire. has 83% reduced wire feed speed capability for 6
o'clock pipe welding with Innershield ® wire.
K2614-9
™
®
K126 PRO Innershield Gun
For self-shielded wire with 15 ft. (4.5 m) cable. For .062-5/64 in.
(1.6-2.0 mm) wire. Includes K466-10 Connector Kit.
K126-12
KP1696-1 Drive Roll Kit - Includes: 2 V groove drive rolls and
inner wire guide for Steel Wires. (Used on LN-25 Pro)
K487-25 Magnum SG Spool Gun
Hand held semiautomatic wire feeder. Requires SG Control
Module and Input Cable.
K488 SG Control Module
The Interface between the power source and the spool gun.
Provides control of the wire speed and gas flow. For use with a
spool gun.
K691-10 Input Cable (For SG Control Module)
For Lincoln engine power sources with 14-pin MS-type connec-
tion, separate 115V NEMA receptacles and output stud connec-
tions.
POWER FEED 25M
This compact shop or construction wire feeder is push-pull capa-
ble for premium aluminum welding. Featuring our MAXTRAC ®
drive system, full controls and procedural memory presets, the
Power Feed ® 25M is ready for advanced process welding on
almost any application.
C-2