Lenovo ThinkPad P16 Gen 2 User Manual page 24

Store the pen
The pen is shipped with a pen holder. To store the pen on the computer:
1. Insert the pen holder into USB-A 3.2 connector on the computer.
2. Insert the pen into the pen holder in one of the ways as shown.
Charge the pen
1. Remove the pen cap in the direction as shown.
2. Connect the pen to a charger with a USB-C cable.
3. Install the pen cap back on the pen.
Maintenance tips
• The pen is not waterproof. Keep the pen away from water and excessive moisture.
• The pen contains pressure sensors. Apply an appropriate amount of pressure when writing on the screen.
Do not subject the pen to shock or vibration.
• If possible, place your pen in a well-ventilated and dry area without direct exposure to sunshine.
18
ThinkPad P16 Gen 2 Linux User Guide